Dust monitor

Dust Monitor X20DMScreen Shot 2016-04-09 at 6.23.37 pm

INFRA X20DM Dust Monitor is a high quality sensor that simultaneously measures the following parameters:

Average dust concentration
Maximum dust concentration
Under a wide range of ambient environmental conditions, long-term, precise and drift-less measurements of airborne particulate matter concentrations down to 1 μg/m3 are assured by a unique state-of-the-art combination of optical sensing and electronic processing techniques.

Interval time is selected via INFRA Net and can be handled
remotely. It can be used for size-selective particulate
measurements using an omni-directional inlet and ACGIH
traceable metal cyclones for monitoring PM10, PM4, PM2.5 and PM1.0, that is the concentration of particles smaller than 10 μm down to 1 μm aerodynamic equivalent diameter, respectively.

Concentration measurement range: 0.001 to 400 mg/m3

Dust Monitor X20DM2Screen Shot 2016-04-09 at 6.23.55 pm

INFRA X20DM2 Dust Monitor is a high quality sensor that simultaneously measures the following parameters:

PM10 dust concentration
PM2.5 dust concentration
PM1.0 dust concentration
TSP Total Suspended Particles
Measures the different sizes simultaneously in four separate channels.

Intended for continuous monitoring of dust particles from demolition, construction works and traffic. An alarm and/or alert can be automatically sent out as either e-mail or text message from INFRA Net when the predefined threshold on PM10 is breach. Interval time and alarm levels are selected via INFRA Net and can be handled remotely.

Measurement range: PM10 and TSP 0.01–6000 μg/m3 PM2.5 and PM1 0.001–600 μg/m3
Immediate live display of results on INFRA Net

Sub header

OSTERMAN

With you for the long run

© 2021 All Rights Reserved | Privacy Policy | Terms of Service